How to install a DYMO label printer
This guide will show you how to install your DYMO label printer, print your first product label in mybridal and what to check if your labels are not printing correctly.
Before you start
You will need your DYMO LabelWriter, its power supply and USB cable, a roll of compatible labels and the Windows computer or Mac you will use to print from mybridal.
The first thing to do is check DYMO’s software compatibility information for your printer and computer. Download the appropriate installer from the DYMO software download page. For older printers, check which software DYMO supports before installing.
Install the software before connecting the printer to your computer. Once installation is complete, connect the printer and print a test label in DYMO Connect before moving on to mybridal.
Check the label dimensions on your roll or packaging. You will need to choose this size in mybridal and again in the print window. If you have a LabelWriter 550 series printer, use compatible Authentic DYMO LW labels, as explained in DYMO’s LabelWriter 550 guide.
Installing your printer on Windows
-
Leave the printer’s USB cable disconnected from your computer while you install the software.
-
Open the installer you downloaded from DYMO and follow the instructions on screen.
-
Once installation has finished, connect the printer to its power supply and your computer.
-
Load the label roll following your printer’s instructions, then open DYMO Connect.
-
Select your printer and the correct label size. Create a simple label with a few words and print one copy.
Once your test label prints correctly, you can move on to printing from mybridal.
Installing your printer on a Mac
Choose the DYMO installer that matches your version of macOS and your Mac. The windows you see during installation may vary depending on the software version.
-
Keep the printer disconnected from your Mac while you run the installer.
-
Follow the installation steps. If the official DYMO installer asks for your Mac administrator password, enter it to complete installation.
-
Some installers open a Terminal window for this password. The characters will not appear as you type. Enter your password and press Return.
-
If macOS displays a message about a blocked DYMO driver extension, open the settings offered by that message and allow the DYMO extension. Follow any restart instructions.
-
Connect the printer to power and your Mac, then load your labels.
-
Open DYMO Connect, select your printer and label size, and print a simple test label.
If the printer is missing, check System Settings > Printers & Scanners. Check the USB connection and add the printer if needed. If your Mac still cannot print, follow DYMO’s Mac troubleshooting instructions.
Printing your first label in mybridal
Once your printer is working in DYMO Connect, open mybridal on the same computer.
-
Go to Inventory > Labels. If mybridal asks you to check your SKUs, complete that review before continuing to Set Up & Print.
-
Under Label brand, choose DYMO. Choose the Label size that matches the roll in your printer. Check the dimensions as well as the label number.
-
Choose Barcode (Code 128), QR code or No code, then tick the details you would like on your label.
-
Select one product variation and set its label quantity to 1. Check the live preview before printing.
-
Click the Print Labels button, which shows the number of labels selected.
-
In the print window, choose your DYMO printer as the destination and select the matching paper size.
-
Expand More settings in the browser’s print preview. Untick Headers and footers to remove page numbers, dates and the website address from your labels.
-
Set Margins to None where available to remove extra space around the label. Set the scale to 100% or Actual size, and check the orientation matches your label.
-
Check the print preview again. It should show just your label, with no page number, date or website address at the top or bottom.
-
Print the test label. Check the text is readable and, if you included a barcode or QR code, test scanning it before printing a larger batch.
mybridal uses your browser’s print window. Your DYMO printer needs to be available to your computer as a printer. You do not need to connect mybridal to the DYMO web service.
The number of labels is already set in mybridal, so leave Copies in the print window at 1. Increasing this will repeat the whole batch.
Troubleshooting
My labels have page numbers, dates or a website address on them
These are added by your browser’s Headers and footers setting. You can remove them in the print preview before sending your labels to the printer.
-
Click Print Labels in mybridal to open the print preview.
-
In Chrome or Microsoft Edge, expand More settings.
-
Find Headers and footers and untick it. This removes the page numbers and other browser text.
-
Set Margins to None where available. This removes the extra browser spacing around the label.
-
Keep the matching label paper size selected and the scale at 100% or Actual size.
-
Check that the extra text has disappeared from the preview, then print one label to check the result.
The options may look different depending on your browser and printer. If you cannot see a setting, expand the print options first. Microsoft also explains these controls in its guide to printing in Edge.
Check these settings when you change printer or browser. Turning off headers and footers removes the page numbers. Setting margins to None removes extra space. Your browser may remember your choices, but always check the preview before printing a batch.
My printer does not appear in the print window
First, check whether you can print a test label from DYMO Connect. If you cannot, check the power and USB connection, then restart the printer and computer. If you use a USB hub, try connecting directly to the computer.
Check that your printer appears in your computer’s Printers & Scanners settings. Once it is available there, close and reopen your browser and try again. You may need to expand the printer list or open the system print dialog to see it.
I click Print Labels, but nothing happens
Check that you have selected a variation and entered a label quantity greater than zero. Look for a message in mybridal asking you to check SKUs or change the label layout.
If a label preview opens separately, use its Print labels button. If your browser reports that it blocked a pop-up, allow pop-ups for your mybridal page and try again. Check behind other windows in case the print window is already open.
The label is too small, cut off or printing sideways
Check that these three sizes match: the labels loaded in the printer, the label size selected in mybridal and the paper size selected in the print window.
Use 100% or Actual size rather than a setting that shrinks the label to fit. Turn off headers and footers, check the orientation, and remove additional browser margins where that option is available. Print one label to check the result.
If mybridal says the details do not fit, untick optional details under Label details or choose a larger label and load the matching roll.
My labels are blank, faint or feeding incorrectly
Check the roll is compatible with your printer and loaded in the correct direction. Try another roll if available, then print a simple label directly from DYMO Connect.
If that test also fails, follow DYMO’s print quality checks. If the labels feed incorrectly or the print has gaps, follow DYMO’s cleaning instructions for your printer.
If the DYMO test prints correctly, return to mybridal and check the paper size, scale and label preview before trying again.
Windows still cannot print after restarting
If the connection checks have not helped, reinstall the compatible DYMO software:
-
Disconnect the printer’s USB cable.
-
Open Settings > Apps and find Installed apps or Add or remove programs.
-
Find and uninstall DYMO Connect. If DYMO Connect Web Service is listed separately as part of that installation, uninstall it too.
-
Restart your computer, then reinstall the appropriate software from DYMO’s download page.
-
Reconnect the printer after installation and test printing in DYMO Connect before reopening mybridal.
I see a DYMO web service or certificate error
The product labels in mybridal print through your computer’s normal print window. A separate DYMO web service or certificate message is not a connection test for this printing method.
Check whether the printer is available in the print window and whether DYMO Connect can print a test label. If DYMO’s own software continues to show an error, use DYMO support for help with that installation.
Still need help?
If your test label prints in DYMO Connect but you are still having trouble printing from mybridal, please email help@mybridalsoftware.com.
Please include your printer model, whether you use Windows or Mac, your browser, the label size and a screenshot of any error. A photo of the printed label and a screenshot of your print settings will also help us see what is happening.
